FIAT 500L - Manual (Page 199)

REPLACING THE BOTTLE
Proceed as follows:
❒ disconnect connection A fig. 160;
❒ turn the cylinder to be replaced anticlockwise and
raise it;
❒ fit the new cylinder and turn it clockwise;
❒ connect connection A to the cylinder and insert
the transparent pipe B into its housing.
CHANGING A BULB
GENERAL INSTRUCTIONS
❒ Before changing a bulb check the contacts for
oxidation;
❒ burnt bulbs must be replaced by others of the
same type and power;
❒ after replacing a headlight bulb, always check the
correct alignment of the light beam;
❒ when a light is not working, check that the
corresponding fuse is intact before changing a bulb.
For the location of fuses, refer to the paragraph
“If a fuse blows” in this section;
WARNING
Modifications or repairs to the electric
system that are not carried out properly
or do not take the system technical
specifications into account can cause
malfunctions leading to the risk of fire.
WARNING
Halogen bulbs contain pressurised gas,
in the case of breakage they may burst
causing glass fragments to be projected
outwards.
fig. 160 F0Y0007
195
GETTINGTO KNOW
YOURCAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX