FIAT 500L - Manual (Page 106)

BONNET
OPENING
Proceed as follows:
❒ pull lever A fig. 102 in the direction indicated by
the arrow;
❒ operate lever B fig. 103, in the direction indicated
by the arrow, and raise the bonnet.
IMPORTANT Two side gas shock absorbers are
provided to assist in opening the bonnet. Do not
tamper with these shock absorbers and accompany
the bonnet when raising.
IMPORTANT Before raising the bonnet, make sure
that the arms of the wipers are not raised from
the windscreen and that the wiper is not operational.
The following plate is applied inside the engine
compartment fig. 104:
CLOSING
Lower the bonnet to approximately 20 centimetres
from the engine compartment and let it drop. Make
sure that the bonnet is completely closed and not
only fastened by the locking device by trying to open
it.
If it is not perfectly closed, do not try to press the
bonnet down but open it and repeat the procedure.
fig. 102 F0Y0228
fig. 103 F0Y0115
fig. 104 F0Y1100
102
GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX