FIAT 500L - Manual (Page 100)

Backrest folding (partial extension)
Proceed as follows:
❒ completely lower the rear seat head restraints;
❒ move the seat belts to the side, making sure that
they are correctly extended and not twisted;
❒ using lever A fig. 87, adjust the seat into the
desired position;
❒ raise lever B fig. 88 to fold the backrest (see
fig. 89).
Note It is advisable to carry out this procedure from
the outside, with the left hand.
Repositioning the backrest
To bring the backrest back to normal usage position,
lift lever B fig. 88 and then raise the backrest.
WARNING
Make sure the backrest is properly
secured at both sides to prevent it
moving forward in the event of sharp braking
with possible impacts on possible occupants.
fig. 87 F0Y0074
fig. 88 F0Y0259
fig. 89 F0Y0075
96
GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX