FIAT 500L User Manual

Page 24

Note “Trip B” may be disabled (see “Activating Trip
B”). “Range” and “Instantaneous fuel consumption"
parameters cannot be reset.

VALUES DISPLAYED

Outside temperature (for versions/markets, where
provided)

Indicates the temperature outside the passenger
compartment.

Range

This indicates the approximate distance which can be
travelled with the amount of fuel present in the
tank. “- - - -” will appear on the display in the
following cases:
❒ range value lower than 50 km (or 30 mi)
❒ car parked with engine running for a long period.

IMPORTANT The range value variation can be
affected by several factors: driving style, type of route
(motorway, urban, mountain roads, etc.), conditions
of use (load, tyre pressures, etc.). Trip planning
must therefore take the above into account.

Distance travelled

Shows the distance covered since the start of the
new journey.

Average consumption

Shows the approximate average fuel consumption
since the start of the new journey.

Instantaneous consumption

This value shows the fuel consumption. The value is
constantly updated. The display will show “- - - -”
if the car is parked with the engine running.

Average speed

This shows the car average speed as a function of the
overall time elapsed since the start of the new
mission.

Trip time

Shows the time elapsed since the start of a new
journey.

IMPORTANT If there is no information, the Trip
computer displays "- - - -" in place of the value.
When normal operating condition is restored,
calculation of different units will restart regularly. No
values displayed before the failure will be reset nor
will a new mission be started.

GETTING TO

KNOW YOUR CAR

SAFETY

STARTING AND

DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN EMERGENCY

SERVICING AND

MAINTENANCE

TECHNICAL

SPECIFICATIONS

INDEX