FIAT 500L - Manual (Page 246)

Replacing the rear window wiper blade
Proceed as follows:
❒ raise cover A fig. 206, undo nut B and remove arm
C;
❒ correctly position the new arm, fully tighten nut B
then lower cover A.
SPRAY NOZZLES
Windscreen washer
The window washer jets A fig. 207 are fixed. If there
is no jet of fluid, firstly check that there is fluid in
the reservoir (see paragraph “Checking fluid levels”
in this chapter).
Then check that the nozzle holes are not clogged;
use a needle to unblock them if necessary.
IMPORTANT In versions with a sun roof, make sure
that the sun roof is closed before operating the
window washer jets.
fig. 206 F0Y0208 fig. 207 F0Y0209
242
GETTINGTO KNOW
YOURCAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX