FIAT 500L - Manual (Page 135)

SAFETY
SEAT BELTS
USING THE SEAT BELTS
The seat belt should be worn keeping the torso
straight and rested against the backrest.
To fasten the seat belts, hold the tongue A fig. 124
and insert it into the buckle B, until it clicks into
place.
If the seat belt jams during removal, let it rewind for
a short stretch, then pull it out again without jerking.
To unfasten the seat belt, press button C. Guide
the seat belt while it is rewinding, to prevent it from
twisting. Through the retractor, the belt
automatically adapts to the body of the occupant
wearing it, allowing freedom of movement.
WARNING
Never press button C fig. 124 when
travelling.
The retractor may lock when the car is parked on a
steep slope: this is normal. Furthermore, the
retractor mechanism locks the belt if it is pulled
sharply or in the event of sudden braking, collisions
or high-speed bends.
The rear seat is fitted with inerti
seat belts with
three anchor points and a retractor. Wear the rear
seat belts as shown in fig. 125.
fig. 124 F0Y0085 fig. 125 F0Y0086
131
GETTINGTO KNOW
YOURCAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
al