FIAT 500L - Manual (Page 140)

WARNING
If the belt has been subjected to a high
level of stress, for example after an
accident, it must be completely replaced
together with the attachments, attachment
fixing screws and the pretensioner. In fact, even
if the belt has no visible defects, it could have
lost its resilience.
SEAT BELT MAINTENANCE
For keeping the seat belts in efficient conditions,
carefully observe the following:
❒ always use the seat belt with the strap well
stretched and not twisted; make sure that it is free
to run without obstructions;
❒ check seat belt operation as follows: attach the
seat belt and pull it hard;
❒ replace the belt after an accident of a certain
severity even if it does not appear to be damaged.
Always replace the seat belt if the pretensioners
were deployed;
❒ to clean the seat belts, wash by hand with water
and neutral soap, rinse and leave to dry in the
shade. Do not use strong detergents, bleach,
colourants or any other substance which could
damage the belt fibres;
❒ prevent the retractors from getting wet: their
correct operation is only guaranteed if water does
not get inside;
❒ replace the seat belt when it shows wear or cuts.
136
GETTINGTO KNOW
YOURCAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX