FIAT 500L - Manual (Page 72)

INCREASING THE STORED SPEED
This can be carried out in two ways:
❒ by pressing the accelerator and storing the new
speed reached
or
❒ by moving the stalk upwards (+) until the new
speed, which will be stored automatically, is
reached.
Each movement of the stalk corresponds to an
increase in speed of about 1 km/h, while keeping the
stalk held upwards will continuously increase the
speed.
REDUCING THE STORED SPEED
This can be carried out in two ways:
❒ by deactivating the device and then storing the
new speed
or
❒ by moving the lever downwards (–) until the new
speed, which will automatically remain stored, is
reached.
Each movement of the lever corresponds to a
reduction in speed of about 1 km/h, while keeping
the stalk held downwards will decrease the speed
continuously.
DEACTIVATING THE DEVICE
The device can be deactivated by the driver in the
following ways:
❒ turning ring nut A to O;
❒ by stopping the engine
❒ by pressing the brake pedal, the clutch or the
accelerator; in this last case the system is not
completely deactivated but gives priority to the
acceleration request. The device still remains
active, without the need to press the CANC RES
button to return to the previous condition once
acceleration is concluded.
Automatic deactivation
The device deactivates automatically in the following
cases:
❒ intervention of the ABS or ESC systems;
❒ with the car speed below the set limit
❒ in the event of system failure.
68
GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX