FIAT 500L - Manual (Page 320)

Data transfer
The trip data is saved in the system’s memory. By
correctly configuring a USB drive and going to the
eco:Drive site, the history of trips can be archived in
a personal profile and the overall analysis of the trip
data and driving style can be consulted.
Do not remove the USB stick until the system has
downloaded the data since they might be lost
completely or partially.
During the transfer of data to the USB drive,
messages may appear on the display to guide the user
correctly through the operation; follow these
instructions.
These messages are only displayed with ignition key
in STOP position and system off delay longer than 0
minutes.
NOTES
Warning messages will be displayed when the USB
storage device is full.
When the eco:Drive data is not transferred to USB
storage device for a long time, the internal memory
of the uconnect® system may be exhausted.
Warning messages will also be displayed in these
circumstances: it will be necessary to connect the
USB storage device configured for eco:Drive in order
not to lose the saved data.
SETTINGS
Press the SETTINGS button (10-fig. 1) on the front
panel to display the "Settings" main menu (see fig.
18).
NOTE The menu items displayed vary according to
the versions.
The menu comprises the following options:
❒ Display;
❒ Time & Date;
❒ Safety/Assistance (for versions/markets, where
provided);
❒ Lights (for versions/markets where provided);
❒ Doors & Locks;
❒ Audio;
❒ Phone / Bluetooth;
fig. 18 F0Y1005
316