Festool KS 88 E User Manual
Page 22
22
9.5
Cleaning or replacing window for laser
(KS 120 EB only)
The window (21.2) for protecting the laser can
become dirty during operation. It can be removed
for cleaning or replacement.
– Release the screw (21.5) by approx. 2 rota-
tions.
– Press the window at the same time in the direc-
tions (21.3) and (21.4).
– Remove the window.
– Clean the window or replace it with a new one.
– Fit the cleaned/new window. Both of the pegs
(21.1) on the window must snap into the recesses
of the upper hood as shown in Fig. 21.
– Tighten the screw (21.5).
10
Disposal
Do not throw the power tool in your household
waste! Dispose of the machine, accessories and
packaging at an environmentally-responsible
recycling centre! Observe the valid national regu-
lations.
EU only: European Directive 2002/96/EC stipulate
that used electric power tools must be collected
separately and disposed of at an environmentally
responsible recycling centre.
Information on REACh:
www.festool.com/reach
11
EU Declaration of Conformity
Circular cross-cut saw
Serial no.
KS 120 EB
495773, 495774, 495775,
495776, 495777
KS 88 E
496868, 496869, 496871,
496872
Year of CE mark KS 120 EB
2007
KS 88 E
2009
We solely declare that this product conforms with
the following standards and normative docu-
ments: EN 61029-1, EN 61029-2-9, EN 55014-1,
EN 55014-2, EN 61000-3-2, EN 61000-3-3 in
accordance with the regulations in Directives
2004/108/EC, 2006/42/EC, 2011/65/EU.
Festool Group GmbH & Co. KG
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Martin Zimmer
Head of Research, Development and Technical
Documentation
01.03.2013