Yamaha CP 33 - Manual (Page 50)

Master mode
CP33 Owner’s Manual 50
Appendix
Master mode
• The asterisk (*) represents the Zone number.
• The Master Edit settings can only be made when the Master mode is tur ned on (page 26).
Message List
* Never attempt to turn off the power while “C C C CL L L Lr r r r” or “F F F FC C C CL L L L” appears in the display. Turning the power off in this state may cause the system to freeze.
Display Function Default
*.01 Lowest Note of the Range C-2
*.02 Highest Note of the Range G8
*.03 MIDI Transmit Channel for Master Mode
Zone 1 = Ch 1
Zone 2 = Ch 2
*.04 Internal Tone Generator On/Off On
*.05 Slider Volume
*.06 Volume for Internal Tone Generator 100
*.07 Volume for External Tone Generator 100
*.08 Pan for Internal Tone Generator 64
*.09 Pan for an External Tone Generator 64
*.10 Reverb Depth for Internal Tone Generator 10
*.11 Effect Depth for Internal Tone Generator 10
*.12 Octave 0
*.13 Voice for Internal Tone Generator 1
*.14 Program Change Number 0
*.15 Bank Select MSB 0
*.16 Bank Select LSB 122
Display Comment
Displayed after factory presets are recalled.
Displayed when the current operation is completed.
Indicates that internal memory has been cleaned, because the power has
been turned off.
Confirms whether each operation is executed or not.
*
*
CAUTION