Yamaha CP 33 - Manual (Page 39)

Detailed Settings
CP33 Owner’s Manual 39
Ref
erence
F6. Click Volume
Use this function to adjust the Click volume.
• Setting range: 1 – 20
• Default setting: 10
F7. MIDI Functions
This allows you to make detailed adjustments to the MIDI
settings.
For more information about MIDI, see the "About MIDI"
section (page 42).
MIDI Transmit Channel Selection
In any MIDI control setup, the MIDI channels of the
transmitting and receiving devices must be matched for
proper data transfer. This parameter enables you to specify
the channel on which the CP33 transmits MIDI data.
• Setting range: 1 – 16, OFF (not transmitted)
• Default setting: 1
n In Dual, Voice 1 data is transmitted on its specified
channel. In Split, right Voice data is transmitted on its
specified channel. In Dual, Voice 2 data is transmitted on
the next greater channel number relative to the specified
channel. In Split, left Voice data is transmitted on the
next greater channel number relative to the specified
channel. In either case, no data is transmitted if the
transmit channel is set to "OFF."
n While the Master mode is turned on, "*03 MIDI
Transmit Channel" parameter in the Master Edit menu
will be enabled for MIDI channel assignments.
MIDI Receive Channel Selection
In any MIDI control setup, the MIDI channels of the
transmitting and receiving devices must be matched for
proper data transfer. This parameter enables you to specify
the channel on which the CP33 receives MIDI data.
• Setting range: ALL, 1&2, 1 – 16
• Default setting: ALL
ALL: "Multi-timbre" Receive. This allows simultaneous
reception of different parts on all 16 MIDI channels,
enabling the CP33 to play multi-channel Song data
received from a music computer or sequencer.
1&2: "1&2" Receive. This allows simultaneous
reception on channels 1 and 2 only, enabling the CP33
to play 1 and 2 channel Song data received from a music
computer or sequencer.
Local Control ON/OFF
"Local Control" refers to the fact that, normally, the CP33
keyboard controls its internal tone generator, allowing the
internal Voices to be played directly from the keyboard.
This situation is "Local Control On," since the internal
tone generator is controlled locally by its own keyboard.
Local Control can be turned OFF, however, so that the
CP33 keyboard does not play the internal Voices, but the
appropriate MIDI information is still transmitted via the
MIDI OUT terminal when notes are played on the
keyboard.
At the same time, the internal tone generator responds to
MIDI information received via the MIDI IN terminal.
• Setting range: ON/OFF
• Default setting: ON
SHORTCUT
You can jump directly to the Click functions by pressing the
[TEMPO/FUNCTION] button while holding the [CLICK]
button.