Touch sensitivity-[touch, Touch sensitivity—[touch, Effect – Yamaha CP 33 User Manual

Page 18: Ref erence, Playing voices cp33 owner’s manual

Playing Voices

CP33 Owner’s Manual

Ref

erence

[EFFECT]

The [EFFECT] button allows you to select an effect to give your sound greater depth and animation.

• OFF . . . . . . . . . . .When no effect is selected, no EFFECT indicator is lit.
• CHORUS . . . . . . .Adds depth and richness to the sound.
• PHASER . . . . . . . .Adds a sweeping effect to the sound.
• TREMOLO . . . . .Adds an animated, vibrating effect to the sound.
• ROTARY SP . . . . .Adds the vibrato effect of a rotary speaker.

To select an effect type, press the [EFFECT] button a few times until the indicator corresponding to the
desired type lights (the indicators light in sequence each time you press the [EFFECT] button). No effect is
produced when all indicators are off.

• Default settings: The default effect type (including OFF) and depth settings are different for each voice.

Adjusting Effect Depth

You can adjust the effect depth for the selected voice by using the [NO/–] and [YES/+] buttons while holding
the [EFFECT] button.
Default depth settings are different for each voice. The depth range is from 0 (no effect) through 20 (maximum
effect depth). The current depth setting appears on the display while the [EFFECT] button is held.

n Releasing the [EFFECT] button changes the effect type. If you hold down the [EFFECT] button to change the

depth, the effect type will not be changed.

You can select four different types of keyboard touch sensitivity—HARD, MEDIUM, SOFT or FIXED—to
match different playing styles and preferences.

• HARD . . . . . . . . .Requires that the keys be played quite hard to produce maximum loudness.
• MEDIUM . . . . . . .Produces a fairly "standard" keyboard response.
• SOFT . . . . . . . . . .Allows maximum loudness to be produced with relatively light key pressure.
• FIXED . . . . . . . . .All notes are produced at the same volume no matter how hard the keyboard is played.

(No indicators are lit.) The fixed volume can be changed.

n This setting does not change the weight of the keyboard.

To select a touch sensitivity type, press the [TOUCH] button a few times until the indicator corresponding to
the desired type lights (the indicators light in sequence each time the [TOUCH] button is pressed). No
indicator is lit when "FIXED" is selected.

• Default setting: MEDIUM

Touch Sensitivity—[TOUCH]

BRILLIANCE

REVERB

EFFECT

TOUCH

BRIGHT

NORMAL

MELLOW

HALL 1

HALL 2

STAGE

PHASER

TREMOLO

CHORUS

ROTARY SP

HARD

MEDIUM

ROOM

SOFT

PANEL

LOCK