Yamaha CP 33 - Manual (Page 22)

Playing Voices
CP33 Owner’s Manual 22
Ref
erence
5
Press the [SPLIT] button to exit Split and return to normal play.
[VARIATION] in Split
You can turn the variation on or off for Split Voices. Normally, the Voice indicator of the right Voice lights in
Split. The [VARIATION] button can be used to turn the variation for the right Voice on or off as required.
While the [SPLIT] button is held, however, the Voice indicator of the left Voice lights. In this state the
[VARIATION] button turns the variation for the left Voice on or off.
[REVERB] in Split
The reverb type assigned to the right Voice will take priority over the other. (If the reverb is set to OFF, the left
voice's reverb type will be in effect.) Reverb depth setting (i.e., pressing the [NO/–] or [YES/+] buttons while
holding the [REVERB] button—refer to page 17) will be applied to the right and left Voices. When you exit
from Split, the changed Reverb depth setting will be applied to the right Voice only.
[EFFECT] in Split
Depending on the conditions, one effect type will take priority over the other. The depth will be decided
according to the depth default value of the Voice combination.
However, using function F4 (page 37) you can change the depth value for each Voice as you like. Effect depth
setting via the panel controls (i.e., pressing the [NO/–] or [YES/+] buttons while holding the [EFFECT]
button—refer to page 18) will be applied to the right and left Voices. When you exit from Split, the changed
Effect depth setting will be applied to the right Voice only.
Use the Pitch Bend wheel to bend notes up (roll the wheel away from you) or down (roll the wheel toward you)
while playing the keyboard. This wheel is self-centering and will automatically return to normal pitch when
released. Try out the Pitch Bend wheel while pressing a note on the keyboard.
The Modulation wheel applies vibrato to the sound. The more you move this wheel up, the greater the effect
that is applied to the sound. Try out the Modulation wheel with various preset Voices while playing the
keyboard.
n Keep in mind that many of the preset Voices are not set with a Modulation effect. (This is to ensure the most
natural sound on these acoustic instrument Voices.) However, the Modulation wheel can be effectively used to
control user-programmable effects, as well as alter the sounds of a connected MIDI tone generator.
n To avoid accidentally applying Modulation or other effects to the current Voice, make sure the Modulation Wheel
is set to minimum before you start playing.
Bending Notes—Pitch Bend Wheel
Adding a Vibrato Effect to the Sound—Modulation Wheel
Pitch Bend Wheel
Raises the pitch
Lowers the pitch
Modulation Wheel
Maximum
Minimum