Yamaha CP 33 - Manual (Page 11)

Before Using the CP33
CP33 Owner’s Manual 11
Introduction
Make sure that the power is off when connecting or disconnecting any pedal.
Sustain Pedal (Sustain Pedal jack)
This jack is for connecting the included FC3 foot pedal. The pedal functions in the same way as a damper
pedal on an acoustic piano. Connect the included pedal (FC3) to this jack and press the pedal to sustain the
sound.
When Voices of the GRAND PIANO 1 Voice (including the Variation) and the MONO PIANO Voice (not
including the Variation) are selected, pressing the FC3 pedal activates the instrument's special Sustain Samples,
which accurately recreate the unique resonance of an acoustic grand piano's soundboard and strings. The FC3
can also be used to control the half pedal effect on these Voices, recreating the partial damping of strings that is
possible on an actual piano. An optional FC4/FC5 foot switch can also be connected to this jack. However,
these foot switches cannot be used to control the half pedal effect.
n The depth of the effect produced by the Sustain Samples can be adjusted via the Pedal Functions (page 38) in
Function.
AUX Pedal (AUX Pedal jack)
This jack is for connecting an optional FC4/FC5 foot switch or an optional FC7 foot controller. A wide range
of functions, including the Soft Pedal function can be assigned to this jack. For instructions on assigning the
pedal, refer to page 38.
n The FC7 Foot Controller can be used to control Expression (page 38).
Using the Pedals
FOOT PEDAL
SUSTAIN AUX FC3
CAUTION