Yamaha CP 33 - Manual (Page 37)

Detailed Settings
CP33 Owner’s Manual 37
Ref
erence
F4. Split Functions
This menu enables you to make various detailed settings
for Split. By changing the split point or other setting, you
can optimize the settings for the songs you play.
Be sure to select the Split by pressing the [SPLIT] button
before engaging Function.
If Split is not engaged,
will appear instead of
and you will be unable to select the Split functions. Also
note that you must exit Function before you can engage
Split.
Split Point
• Setting range: The entire keyboard
• Default setting: F 2
Set the point on the keyboard that separates the right and
left-hand sections (split point). The pressed key is included
in the left-hand range.
• Instead of pressing the [NO/–] [YES/+] buttons, you can
engage the split point by pressing the appropriate key on
the keyboard.
• Example key name indications for Split
Right Voice Octave Shift
Left Voice Octave Shift
• Setting range: -1, 0, 1
• Default setting: Different for each voice combination
You can shift the pitch up and down in octave steps for the
Right Voice and Left Voice independently. This allows you
to have each Voice sound in an appropriate range.
You can make this setting for each combination of Voices
individually.
Right Voice Effect Depth
Left Voice Effect Depth
• Setting range: 0 – 20
• Default setting: Different for each Voice combination
These functions make it possible to individually set the
depth of the effect for the left and right Split Voices.
The effect depth settings cannot be changed unless the
[EFFECT] is ON. You must exit Function before you can
turn on an [EFFECT].
You can make this setting for each combination of Voices
individually.
Sustain Pedal Range
• Setting range: ALL (for both voices)
1 (for the right Voice)
2 (for the left Voice)
• Default setting: ALL
The Sustain Pedal Range function determines whether the
Sustain pedal affects the right Voice, the left Voice, or both
the left and right Voices in Split.
Reset
This function resets all Split functions to their default
values. Press the [YES/+] button to reset the values.
SHORTCUT:
You can jump directly to the Split functions by pressing the
[TEMPO/FUNCTION] button while holding the [SPLIT]
button.
(F 2) (G2) (A 2)
Lower bar indicates flat Upper bar indicates sharp