ZyXEL Communications ES-3124PWR - Manual (Page 235)

Dimension ES-3124PWR Ethernet Switch
Command Examples 30-15
Figure 30-28 vlan-trunking Command Example
30.8.10 weight
Syntax:
weight ...
where
...
Sets the interface WFQ weighting. A weight value of one to eight is given to
each variable from wt 1 to wt 8.
An example is shown next.
Enable port two and ports six to twelve for configuration.
Set the queue weights from Q0 to Q7.
Figure 30-29 weight Command Example
30.8.11 egress set
Syntax:
egress set
where
Sets the outgoing traffic port list for a port-based VLAN.
An example is shown next.
Enable port-based VLAN tagging on the switch.
Enable ports one, three, four and five for configuration.
Set the outgoing traffic ports as the CPU (0), seven (7), eight (8) and nine (9).
Figure 30-30 egress set Command Example
30.8.12 qos priority
ras(config)# vlan-type port-based
ras(config)# interface 1,3-5
ras(config-interface)# egress set 0,7-9
ras# configure
ras(config)# interface 2,6-12
ras(config-interface)# weight 8 7 6 5 4 3 2 1
ras(config)# interface 1,3-5
ras(config-interface)# vlan-trunking