ZyXEL Communications ES-3124PWR - Manual (Page 214)

Dimension ES-3124PWR Ethernet Switch
29-20 Introducing the Commands
Table 29-3 Command Summary: Configure Mode
COMMAND DESCRIPTION
telnet
number>
Allows Telnet access on the
specified service port.
ftp Allows FTP access on the
specified service port.
ssh Allows SSH access on the
specified service port.
https
number>
Allows HTTPS access on the
specified service port.
remote-
management
start-addr
end-addr
service
|icmp|snmp>
Specifies a group of trusted
computer(s) from which an
administrator may use a service to
manage the switch.
admin-password Changes the administrator
password.
vlan-stacking Enables VLAN stacking on the
switch.
Sets the SP TPID (Service
Provider Tag Protocol Identifier).
default-
management band>
Specifies through which traffic flow
the switch is to send packets.
ssh known-hosts
ip> <1024|ssh-
rsa|ssh-dsa>
Adds a remote host to which the
switch can access using SSH
service.
https cert-regeneration Re-generates a certificate.
timeout <0-65535> Sets the HTTPS timeout period.
multi-login Enables multi-login.
dhcp-relay Enables DHCP relay.
helper-address
[svr2_ip]
[svr3_ip]
Sets the IP addresses of up to 3
DHCP servers.
option Allows the switch to add DHCP
relay agent information.
information Allows the switch to add system
name to agent information.
pwr interface
list>
Enables Power over Ethernet on a
port.
usagethreshold <1-
99>
Sets the power usage limit (in
percentage) and initiates an alarm
when the measured power is
above the threshold.