ZyXEL Communications ES-3124PWR - Manual (Page 230)

Dimension ES-3124PWR Ethernet Switch
30-10 Command Examples
Figure 30-18 no port-access-authenticator Command Example
30.7.5 no ssh
Syntax:
no ssh key
no ssh known-hosts
no ssh known-hosts [1024|ssh-rsa|ssh-dsa]
where
key Disables the secure shell server encryption key. Your switch supports SSH
versions 1 and 2 using RSA and DSA authentication.
known-hosts Remove specific remote hosts from the list of all known hosts.
known-hosts
[1024|ssh-
rsa|ssh-dsa]
Remove remote known hosts with a specified public key (1024-bit RSA1,
RSA or DSA).
An example is shown next.
Disable the secure shell RSA1 encryption key.
Remove the remote host with IP address 172.165.1.8 from the list of known hosts.
Remove the remote host with IP address 172.165.1.9 and with an SSH-RSA encryption key from the list of known
hosts.
Figure 30-19 no ssh Command Example
30.8 interface Commands
These are some commonly used commands that belong to the interface group of commands.
30.8.1 interface
Syntax:
interface
ras(config)# no ssh key rsa1
ras(config)# no ssh known-hosts 172.165.1.8
ras(config)# no ssh known-hosts 172.165.1.9 ssh-rsa
ras(config)# no port-access-authenticator
ras(config)# no port-access-authenticator 1,3-5 reauthenticate
ras(config)# no port-access-authenticator 1,6-7