ZyXEL Communications ES-3124PWR - Manual (Page 218)

Dimension ES-3124PWR Ethernet Switch
29-24 Introducing the Commands
Table 29-5 Command Summary: Interface
COMMAND DESCRIPTION
mirror Enables port mirroring in the
interface.
mirror dir Enables port mirroring for
incoming, outgoing or both
incoming and outgoing traffic.
Port mirroring copies traffic from
one or all ports to another or all
ports for external analysis.
speed-duplex
half|100-full|1000-full>
Sets the duplex mode (half, full)
and speed (10/100/1000 Mbps)
of the connection on the
interface. Selecting auto (auto-
negotiation) makes one port able
to negotiate with a peer
automatically to obtain the
connection speed and duplex
mode that both ends support.
bpdu-control Sets how Bridge Protocol Data
Units (BPDUs) are used in STP
port states.
no ingress-check Incoming traffic is not checked
for VLAN tags.
no gvrp Disables GVRP on the switch.
no flow-control Disables flow control on the
switch.
no vlan-trunking Disables VLAN trunking on the
switch.
no mirror Disables port mirroring on the
switch.
no bandwidth-limit Disables bandwidth limit on the
switch.
no broadcast-limit Disables broadcast storm control
limit on the switch.
no multicast-limit Disables multicast limit on the
switch.
no dlf-limit Disables destination lookup
failure (DLF) on the switch.
no inactive Enables the specified interface
on the switch.
no intrusion-lock Disables intrusion-lock on a port
so that a port can be connected
again after you disconnected the
cable.
inactive Disables the specified interface
on the switch