ZyXEL Communications ES-3124PWR - Manual (Page 213)

Dimension ES-3124PWR Ethernet Switch
Introducing the Commands 29-19
Table 29-3 Command Summary: Configure Mode
COMMAND DESCRIPTION
date Sets the date in year, month and
day format.
timezone <-
1200|...|1200>
Selects the time difference
between UTC (formerly known as
GMT) and your time zone.
timesync Sets the time server protocol.
server Sets the IP address of your time
server.
loginPrecedence
LocalRADIUS |
RADIUSOnly>
Select which database the switch
should use (first) to authenticate a
user.
igmp-snooping Enables IGMP snooping.
bcp-
transparency Enables Bridge Control Protocol
Transparency.
queue level <0-7>
priority <0-7>
Sets the priority level-to-physical
queue mapping.
storm-control Enables broadcast storm control
on the switch.
bandwidth-
control Enables bandwidth control.
mac-aging-time <10-3000> Sets learned MAC aging time.
snmp-server [contact
contact>] [location
]
Sets the geographic location and
the name of the person in charge
of this switch.
get-community Sets the get community.
set-community Sets the set community.
trap-community Sets the trap community.
trap-destination Sets the IP addresses of up to four
stations to send your SNMP traps
to.
logins username
password Configures up to four read-only
login accounts.
service-control icmp Allows ICMP access to the switch
such as pinging and tracerouting.
snmp Allows SNMP management.
http
number>
Allows HTTP access on the
specified service port and defines
the timeout period.