ZyXEL Communications ES-3124PWR - Manual (Page 228)

Dimension ES-3124PWR Ethernet Switch
30-8 Command Examples
1. Enter “ erase running config ” to reset the current running configuration.
2. Enter “ write memory ” to save the changes to the current configuration file. If you want to reset the
second configuration file, use the write memory command again with the specified index number.
The following example resets both configuration files to the factory default settings.
Figure 30-14 CLI: Reset to the Factory Default Example
30.7 Example no Commands
These are the commonly used command examples that belong to the “no” group of commands.
30.7.1 no mirror-port
Syntax:
no mirror-port
Disables port mirroring on the switch.
An example is shown next.
Figure 30-15 no mirror-port Command Example
30.7.2 no https timeout
Syntax:
no https timeout
Resets the https session timeout to default.
An example is shown next. The session timeout is reset to 300 seconds.
Figure 30-16 no https timeout Command Example
30.7.3 no trunk
ras# erase running-config
ras# write memory
ras# write memory 2
ras(config)# no https timeout
Cache timeout 300
ras(config)# no mirror-port