ZyXEL Communications ES-3124PWR - Manual (Page 207)

Dimension ES-3124PWR Ethernet Switch
Introducing the Commands 29-13
Table 29-3 Command Summary: Configure Mode
COMMAND DESCRIPTION
inactive Enables a policy.
vlan Deletes the static VLAN entry.
dhcp-relay Disables DHCP relay.
option Disables the relay agent
information option 82.
information System name is not appended to
option 82 information field.
vlan-stacking Disables VLAN stacking.
ssh key Disables the secure shell server
encryption key. Your switch
supports SSH versions 1 and 2
using RSA and DSA
authentication.
known-hosts
ip>
Removes the specified remote
hosts from the list of all known
hosts.
known-hosts
ip> [1024|ssh-
rsa|ssh-dsa]
Removes remote known hosts with
the specified public key (1024-bit
RSA1, RSA or DSA).
https timeout Resets the session timeout to the
default of 300 seconds.
multi-login Disables another administrator
from logging into Telnet or the CLI.
cluster Disables cluster management on
the switch.
member
address>
Removes the cluster member.
pwr interface
list>
Disables PoE on the specified
ports.
mibtrap Disables sending of PoE MIB
traps.
vlan-type <802.1q|port-based> Specifies the VLAN type.
spq Sets the queuing method to SPQ
(Strictly Priority Queuing).
wfq Sets the queuing method to WFQ
(Weighted Fair Queuing).
ip route Creates a static route.