ZyXEL Communications NBG-318S - Manual (Page 40)

Chapter 2 Introducing the Web Configurator
NBG-318S User’s Guide
40
2.4.3 Summary: Any IP Table
This screen displays the IP address of each computer that is using the NBG-318S via the any
IP feature. Any IP allows computers to access the Internet through the NBG-318S without
changing their network settings when NAT is enabled. To access this screen, open the Status
screen (see
Section 2.4.1 on page 35 ), and click (Details...) next to Any IP Table.
Figure 7 Any IP Table
Remote
MGMT
WWW Use this screen to configure through which interface(s) and from
which IP address(es) users can use HTTP to manage the NBG-
318S.
Telnet Use this screen to configure through which interface(s) and from
which IP address(es) users can use Telnet to manage the NBG-
318S.
FTP Use this screen to configure through which interface(s) and from
which IP address(es) users can use FTP to access the NBG-318S.
DNS Use this screen to configure through which interface(s) and from
which IP address(es) users can send DNS queries to the NBG-
318S.
UPnP General Use this screen to enable UPnP on the NBG-318S.
Maintenance
System General Use this screen to view and change administrative settings such as
system and domain names, password and inactivity timer.
Time Setting Use this screen to change your NBG-318S’s time and date.
Logs View Log Use this screen to view the logs for the categories that you
selected.
Log Settings Use this screen to change your NBG-318S’s log settings.
Tools Firmware Use this screen to upload firmware to your NBG-318S.
Configuration Use this screen to backup and restore the configuration or reset
the factory defaults to your NBG-318S.
Restart This screen allows you to reboot the NBG-318S without turning the
power off.
Config Mode General This screen allows you to display or hide the advanced screens or
features.
Sys OP
Mode
General This screen allows you to select either an Ethernet or a HomePlug
AV WAN connection to the Internet.
Table 4 Screens Summary
LINK TAB FUNCTION