ZyXEL Communications NBG-318S - Manual (Page 219)

Appendix A Product Specifications and Wall-Mounting Instructions
NBG-318S User’s Guide
219
A
P P E N D I X
A
Product Specifications and
Wall-Mounting Instructions
The following tables summarize the NBG-318S’s hardware and firmware features.
Table 95 Hardware Features
Dimensions (W x D x H) 190 x 128 x 33 mm
Power Specification 120~240 VAC, 50/60 Hz
Ethernet ports Auto-negotiating:
This auto-negotiation feature allows the NBG-318S to detect the speed of
incoming transmissions and adjust appropriately without manual
intervention. It allows data transfer of either 10 Mbps or 100 Mbps in either
half-duplex or full-duplex mode depending on your Ethernet network.
Auto-crossover:
Use either crossover or straight-through Ethernet cables.
3-4 Port Switch A combination of switch and router makes your NBG-318S a cost-effective
and viable network solution. You can add up to three computers to the
NBG-318S without the cost of a hub when connecting to the Internet
through the WAN port. You can add up to four computers to the NBG-318S
when you connect to the Internet through a HomePlug connection. Add
more than four computers to your LAN by using a hub.
Reset Button The reset button is built into the rear panel. Use this button to restore the
NBG-318S to its factory default settings. Press for 1 second to restart the
device. Press for 5 seconds to restore to factory default settings.
Antenna The NBG-318S is equipped with a 2dBi detachable antenna to provide clear
radio transmission and reception on the wireless network.
Operation Temperature 0º C ~ 40º C
Storage Temperature -20º C ~ 60º C
Operation Humidity 20% ~ 90% RH (Non-condensing)
Storage Humidity 20% ~ 90% RH (Non-condensing)
Distance between the
centers of the holes on
the device’s back.
125 mm
Screw size for wall-
mounting
M4