ZyXEL Communications NBG-318S - Manual (Page 222)

Appendix A Product Specifications and Wall-Mounting Instructions
NBG-318S User’s Guide
222
Wall-mounting Instructions
Do the following to hang your NBG-318S on a wall.
"
See the product specifications appendix for the size of screws to use and how
far apart to place them.
1 Locate a high position on a wall that is free of obstructions. Use a sturdy wall.
2 Drill two holes for the screws. Make sure the distance between the centers of the holes
matches what is listed in the product specifications appendix.
1
Be careful to avoid damaging pipes or cables located inside the wall when
drilling holes for the screws.
3 Do not screw the screws all the way into the wall. Leave a small gap of about 0.5 cm
between the heads of the screws and the wall.
4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of
the NBG-318S with the connection cables.
5 Align the holes on the back of the NBG-318S with the screws on the wall. Hang the
NBG-318S on the screws.
IEEE 802.11g Uses the 2.4 gigahertz (GHz) band
IEEE 802.11d Standard for Local and Metropolitan Area Networks: Media Access
Control (MAC) Bridges
IEEE 802.11x Port Based Network Access Control.
IEEE 802.11e QoS IEEE 802.11 e Wireless LAN for Quality of Service
Microsoft PPTP MS PPTP (Microsoft's implementation of Point to Point Tunneling
Protocol)
Table 97 Standards Supported (continued)
STANDARD DESCRIPTION