Xerox DocuColor 2060 - Manual (Page 237)

H I G H C A P A C I T Y S T A CK E R ( H C S ) A C C E S S O R I E S
D O C U C O L O R 2 0 6 0 / 2 0 4 5 O P E R A T O R M A N U A L
AC
CESSO
RIES
5–25
Paper Stock Specifications
The following papers are considered to be baseline/centerline and are
recommended to ensure you receive the best quality from your HCS:
Uncoated Xerox Digital Color Xpressions 94, 24 lbs. In Europe, Xerox Colotech+
90 g/m
2 .
Coated Xerox Digital Color Xpressions GlossCoated Text (120 g/m 2 /80 lbs.) In
Europe, Xerox ColoTech Gloss Coated 120 g/m 2 .
NOTE: Manufacturers of coated stock do not recommend its use when the
ambient relative humidity exceeds 60%.
The Stack Tray accepts the following papers:
• Paper weights from a minimum of 64 g/m 2 up to 220 g/m 2 - either
coated or uncoated stock. It also accepts paper from 221 g/m 2 up to 280
g/m 2 with the possibility of degraded stack quality and an increased
jam rate.
• All standard media sizes supported by the digital press with the
exception of JIS B5 LEF (Asian standard size) and 8.5 x 11"/A4 SEF
• Non-standard sizes from 182 to 320 mm (7.2 to 12.6") across the feed
direction, and 203 to 488 mm (8.0 to 19.2") in the feed direction.
• 3 hole drilled 8.5 x 11" and A4 paper must be run LEF to the Stack Tray.
The Top Tray accepts the following papers:
• All media types, sizes, and weights that are supported by the digital
press.
• Duplexed 3 hole drilled paper must be fed short edge first, therefore
must be sent to the Top Tray.