Xerox DocuColor 2060 - Manual (Page 97)

P A P E R A N D P A P E R T R A Y S
D O C U C O L O R 2 0 6 0 / 2 0 4 5 O P E R A T O R M A N U A L
PA
P
E
R
A
N
D
PA
P
E
R
TR
A
Y
S
3–5
Paper Guidelines
For the best results, remember the following:
• Do not load paper or other materials above the MAX line.
• Do not use wrinkled, torn, curled, or folded paper.
• Use the recommended paper sizes and weights.
• Do not mix sizes or weights of paper in a paper tray.
• Ensure that the tray indicator LEDs are set for the correct weight range.
• Follow the Recommended Materials List suggestions found at:
www.xerox.com
Copy paper is fed into the digital press in one of two positions. One position is
called long edge feed (LEF). Long edge refers to the long edge of your copy paper.
When you see LEF, position your copy paper so the long edge is fed first. The
other position is called short edge feed (SEF). Short edge refers to the short edge
of your copy paper. When you see SEF, position your copy paper so the short edge
is fed first.
NOTE: It is imperative that you load paper with the paper guides adjusted
properly. If the paper is NOT loaded properly, it will skew and jams will occur.