Xerox DocuColor 2060 - Manual (Page 169)

S C A N N E R
D O C U C O L O R 2 0 6 0 / 2 0 4 5 O P E R A T O R M A N U A L
S
CANN
E
R
4–59
Define Area
Select Define Area when it is necessary to define different areas as different
types on the same document. The total number of rectangular areas that can be
defined is four. X can be defined 0 - 432 mm and Y can be defined 0 - 297 mm
from the upper right corner of the document as you are reading it.
When areas overlap, the area you defined last has priority. Areas that are not
defined are copied in the Document Type (Text, Photo, or Map) that is selected for
the entire document.
You can enter up to four coordinates, change coordinates, delete an area, define
the next area, or check the entries made for the previous area.
1
Touch the Original Type button on the Image Quality screen.
2
Touch the Define Area button. The Define Area screen is displayed.
Figure 47. Define Area Screen