Xerox DocuColor 2060 - Manual (Page 294)

P R O B L E M S O L V I N G
D O C U C O L O R 2 0 6 0 / 2 0 4 5 O P E R A T O R M A N U A L 6–28
Horizontal Transport (2-Sided Printing Only)
When printing 2-Sided output, perform the following in addition to steps 2
through 8 of the Registration, Vacuum Transport, and Fuser procedure.
Figure 13. Digital Press Horizontal Transport
CAUTION: The Fuser area is extremely hot and injury will occur if not handled
correctly.
1
Lift both of the Horizontal Transport handles 5 and 6.
2
Apply pressure to the handles to securely latch them.
CAUTION: The paper can rip if the paper is not pushed before removing it
from under the lip of the Transport.
3
Push the paper back until you see the edge of the paper, then remove the paper.
4
Reposition handles 5 and 6.
5
Close the Right and Left Front Doors.
6
Follow the instructions on the Touch Screen to restart your print job.
6
5