Xerox DocuColor 2060 - Manual (Page 313)

M A I N T E N A N C E
D O C U C O L O R 2 0 6 0 / 2 0 4 5 O P E R A T O R M A N U A L
M
A
INTEN
AN
CE
8–9
4
To open the Reservoir Cap, grasp the tab at the back of the cap and pull it
forward.
5
Remove the cap from the bottle of Fuser Oil and replace it with the Filler Spout
Cap. This cap was provided to you when your digital press was installed. Contact
your Xerox service representative if you cannot locate the Filler Spout Cap and
need another one.
6
Carefully insert the Filler Spout into the opened Fuser Oil Reservoir and squeeze
the bottle until the oil reaches the maximum fill level tab visible inside the
Reservoir.
7
Remove the Filler Cap from the bottle and place it on a cloth or paper towel to
drain. Return the original cap to the bottle of Fuser Oil.
8
Close the Reservoir Cap, ensuring that it snaps into place.
9
Close the Right Front Door of the digital press.