Xerox DocuColor 2060 - Manual (Page 99)

P A P E R A N D P A P E R T R A Y S
D O C U C O L O R 2 0 6 0 / 2 0 4 5 O P E R A T O R M A N U A L
PA
P
E
R
A
N
D
PA
P
E
R
TR
A
Y
S
3–7
Paper Tray Special Features
Special features help control the environmental conditions in the paper trays to
ensure optimum print capability:
• Paper Trays 1 and 2 have optional heater kits available.
• Paper Tray 3 has a heater underneath the paper tray that can be
activated by your Xerox service representative.
• Paper Tray 3 has two blowers. The lead edge blower is on at all times
and produces heated air if the following selections are made: coated
paper, transparencies, or plain paper 106 g/m
2
or heavier. The trail edge
blower is on at all times and does not produce heated air.
• Paper Tray 3 has air adjust levers on the drawer to regulate the amount
of air disbursed. If the paper weight is 150 g/m
2
or less, the position of
the air adjust levers should be toward the front of the tray. If the paper
weight is 150 g/m
2
or more, the position of the air adjust levers should
be toward the rear of the tray.
Figure 3. Trail Edge and Lead Edge Blowers