Xerox 5222 - Manual (Page 85)

Specifying Fax Destinations
85
DTMF Method - Examples
The DTMF method uses combinations of special characters to send documents. See
the following examples.
• Remote Mailbox - Sends a document to a mailbox on a remote machine.
• Polling - Retrieves a document stored in a mailbox on a remote machine.
• Relay Broadcast - Sends a document to a relay station which in turn sends it to
multiple destinations.
• Remote Relay Broadcast - Sends a document via multiple relay stations. The last
station broadcasts the document to the specified destinations.
: Pulse-to-tone
switch Switches pulse dialing to tone dialing, for example when
using an automated message recording system that
requires tone signals.
’ Speed dial or
group code Indicates a 3-digit speed dial or group code. Place this
character before and after the code.
< > Communication
line switch Switches communication lines that include parameter data,
where the parameter data include characters “0” to “9” or
“,”. The parameter data must be placed between angle
brackets (“<” and “>”). If G3-3CH is installed, entering
either <1>, <2>, or <4> prior to specifying the fax
destination switches the communication lines.
= Dial tone
detection Suspends dialing until a dial tone is detected.
S Password check
(for remote
machine
identification) Use this character to verify that the correct number has
been entered. The machine checks if the password you
entered after “S” matches the fax number of the remote
machine. If the match is confirmed, the machine sends the
document.
space Readability
improvement Improves readability by inserting spaces in a fax number,
for example “1 234 5678” instead of “12345678”.
! Start DTMF code
signaling Pauses regular fax dialing, and starts the DTMF (dual tone
multi-frequency) method for sending documents to
mailboxes on the remote machines.
$ Wait for DTMF
confirmation Wait for a DTMF confirmation signal from the remote
machine and proceed to the next step.
Fax number of remote
machine
!*$ Mailbox number of
remote machine
##\ Mailbox passcode \##$
Fax number of remote
machine
!*$ Mailbox number of
remote machine
**\ Mailbox passcode \##$
Fax number of
remote machine
!*$#\ Relay Send
Number (RSN)
of relay station
\# Speed dial code
for first
destination
# Speed dial code
for second
destination
##$
Character Function Description