Control panel – Xerox 5222 User Manual
Page 36
2 Product Overview
36
Control Panel
The following diagram shows the names and functions of the buttons on the control
panel.
4
7
10
11
12
13
17
8
9
6
16 15
14
5
3
2
1
No.
Button
Function
1
Brightness dial
Use this dial to adjust the contrast of the touch screen.
2
Touch screen
Displays messages and screen buttons for the various features. Touch the
screen to access the features.
3
Displays the login screen to enter the System Administration mode or when
the Authentication/Accounting feature is enabled. Pressing this button again
after you have logged in will log you out immediately.
4
Numeric keypad
Press these buttons to enter the number of copies, passwords, and other
numerical values.
5
Changes the language of the touch screen.
6
indicator
When the machine is left idle for a certain period of time, it enters the
Energy Saver mode to reduce power consumption. This indicator lights up
when the machine is in the Energy Saver mode. To exit this mode, press
this button.
7
Press this button twice to reset the status of all services to the default
settings. The machine will return to the default state after it is switched on.
8
Press this button to temporarily interrupt a copy or print job and give another
job a higher priority. This button lights up while the priority job is being
processed. Press this button after the priority job is finished to resume the
job that was interrupted.
9
Press this button to suspend a job. When multiple jobs are being processed,
pressing this button suspends all the jobs. The jobs can be cancelled by
selecting [Stop] on the Job Status screen.
10
Press this button to start a job.
11
Press this button to enter speed dial codes.
12
Press this button to delete a numeric value or the last digit entered, or to
replace the current value with the default value. The button also cancels a
suspended job.