Machine components, Front view – Xerox 5222 User Manual
Page 32
2 Product Overview
32
Machine Components
The following diagrams show the standard and optional components of the machine.
8
9
10
11
5
1
2
3
4
6
7
Front View
No.
Component
Function
1
Duplex automatic
document feeder
Automatically feeds multiple-page documents into the machine.
2
Control panel
Consists of operation buttons, LED indicators, and a touch screen.
NOTE: For more information, refer to
3
Center tray
Delivers copies or prints face down.
4
Power switch
Switches the machine on/off.
5
Front cover
Open this cover when replacing consumables.
6
Trays 1 & 2
Load paper here.
NOTE: The optional Envelope Tray can be inserted into the slot for Tray 1.
The standard Tray 1 cannot be used when the Envelope Tray is used.
7
Two Tray Module
(Trays 3 & 4) (optional)
Load paper here. These trays can be added to the standard 2-tray
configuration.
8
Left Side tray (optional)
Delivers copies or prints face up.
9
Automatic duplex unit
Automatically copies or prints on both sides of the paper.
10
Tray 5, bypass tray
Use this tray when copying or printing on non-standard paper (e.g., thick-
stock paper and other special media) that cannot be loaded in Trays 1 to 4.
11
High Capacity Feeder
(optional)
Allows you to load up to 2,000 sheets of 20 lb bond or 80 g/m
2
paper in B5,
7.25 x 10.5”, 8.5 x 11”, or A4 size, long edge feed.