ZyXEL Communications GS-3012F/3012 - Manual (Page 76)

Chapter 7 Basic Setting
GS-3012/GS-3012F User’s Guide
76
Figure 32 Basic Setting > IP Setup
The following table describes the labels in this screen.
Table 11 Basic Setting > IP Setup
LABEL DESCRIPTION
Domain Name
Server
DNS (Domain Name System) is for mapping a domain name to its
corresponding IP address and vice versa. Enter a domain name server IP
address in order to be able to use a domain name instead of an IP address.
Default
Management
Specify which traffic flow (In-Band or Out-of-band) the Switch is to send
packets originating from itself (such as SNMP traps) or packets with unknown
source.
Select Out-of-band to have the Switch send the packets to the out-of-band
management port. This means that device(s) connected to the other port(s) do
not receive these packets.
Select In-Band to have the Switch send the packets to all ports except the out-
of-band management port to which connected device(s) do not receive these
packets.
In-Band Management IP Address
DHCP Client Select this option if you have a DHCP server that can assign the Switch an IP
address, subnet mask, a default gateway IP address and a domain name server
IP address automatically.
Static IP Address Select this option if you don’t have a DHCP server or if you wish to assign static
IP address information to the Switch. You need to fill in the following fields when
you select this option.