ZyXEL Communications GS-3012F/3012 - Manual (Page 62)

Chapter 5 Initial Setup Example
GS-3012/GS-3012F User’s Guide
62
1 Connect your computer to any Ethernet port on the Switch. Make sure your computer is
in the same subnet as the Switch.
2 Open your web browser and enter 192.168.1.1 (the default IP address) in the address bar
to access the web configurator. See Section 4.2 on page 49 for more information.
3 Click Basic Setting > IP Setup
in the navigation panel.
4 Configure the related fields in
the IP Setup screen.
5 For the VLAN2 network, enter
192.168.2.1 as the IP address
and 255.255.255.0 as the subnet
mask.
6 In the VID field, enter the ID of
the VLAN group to which you
want this management IP
address to belong. This is the
same as the VLAN ID you
configure in the Static VLAN
screen.
7 Click Add to save your changes
back to the run-time memory.
Settings in the run-time memory
are lost when the Switch’s
power is turned off.