4 configuring the switch, 47 3.4 configuring the switch – ZyXEL Communications GS-3012F/3012 User Manual
Page 47
Chapter 3 Hardware Overview
GS-3012/GS-3012F User’s Guide
47
3.4 Configuring the Switch
You may use the embedded web configurator or command line interface to configure the
Switch. If you’re using the web configurator, you need Internet Explorer 5.5 and later or
Netscape Navigator 6 and later.
You can access the command line interface using a terminal emulation program on a computer
connected to the Switch console port (see
) or access the Switch using
Telnet.
The next part of this guide discusses configuring the Switch using the web configurator.
1000
(GS-
3012F)
Green
Blinking
The system is transmitting/receiving to/from an Ethernet network.
On
The link to a 1000 Mbps Ethernet network is up.
Off
The link to a 1000 Mbps Ethernet network is down.
100 (GS-
3012F)
Amber
Blinking
The system is transmitting/receiving to/from an Ethernet network.
On
The link to a 100 Mbps Ethernet network is up.
Off
The link to a 100 Mbps Ethernet network is down.
MGMT
10
Green
Blinking
The system is transmitting/receiving to/from an Ethernet device.
On
The port is connected at 10Mbps.
Off
The port is not connected at 10Mbps or to an Ethernet device.
100
Amber
Blinking
The system is transmitting/receiving to/from an Ethernet device.
On
The port is connected at 100Mbps.
Off
The port is not connected at 100Mbps or to an Ethernet device.
Table 2 LED Descriptions (continued)
LED
COLOR
STATUS
DESCRIPTION