ZyXEL Communications ES-315 - Manual (Page 93)

ES-315/ES-315-F User’s Guide
93
C
H A P T E R
15
Maintenance
This chapter explains how to configure the screens that let you maintain the firmware and
configuration files.
15.1 The Maintenance Screen
Use this screen to manage firmware and your configuration files. Click Management >
Maintenance in the navigation panel to open the following screen.
Figure 44 Maintenance
The following table describes the labels in this screen.
Table 27 Maintenance
LABEL DESCRIPTION
Current This field displays which configuration is currently operating on the Switch. At the time
of writing, the Switch supports a single configuration.
Firmware
Upgrade
Click Click Here to go to the Firmware Upgrade screen.
Restore
Configuration
Click Click Here to go to the Restore Configuration screen.
Backup
Configuration
Click Click Here to go to the Backup Configuration screen.
Load Factory
Default
Click Click Here to reset the configuration to the factory default settings.
Save
Configuration
Click Config 1 to save the current configuration settings to Configuration 1 on the
Switch.
Reboot
System
Click Config 1 to reboot the system and load Configuration 1 on the Switch.
Note: Make sure to click the Save button in any screen to save your
settings to the current configuration on the Switch.