ZyXEL Communications ES-315 - Manual (Page 47)

ES-315/ES-315-F User’s Guide
47
C
H A P T E R
6
Basic Setting
This chapter describes how to configure the System Info, General Setup, Switch Setup, IP
Setup and Port Setup screens.
6.1 Overview
The System Info screen displays general Switch information (such as firmware version
number). The General Setup screen allows you to configure general Switch identification
information. The General Setup screen also allows you to set the system time manually or get
the current time and date from an external server when you turn on your Switch. The real time
is then displayed in the Switch logs. The Switch Setup screen allows you to set up and
configure global Switch features. The IP Setup screen allows you to configure a Switch IP
address in each routing domain, subnet mask(s) and DNS (domain name server) for
management purposes. The Port Setup screen allows you to configure Switch port settings.
6.2 System Information
In the navigation panel, click Basic Setting and System Info to display the screen as shown.
You can check the firmware version number in this screen.
Figure 17 System Info
The following table describes the labels in this screen.
Table 7 System Info
LABEL DESCRIPTION
System Name This field displays the descriptive name of the Switch for identification purposes.
ZyNOS F/W
Version
This field displays the version number of the Switch 's current firmware including the
date created.
Ethernet
Address
This field refers to the Ethernet MAC (Media Access Control) address of the Switch.