ZyXEL Communications ES-315 - Manual (Page 61)

Chapter 7 VLAN
ES-315/ES-315-F User’s Guide
61
7.2.4 Configure VLAN Port Settings
Use the VLAN Port Setting screen to configure the static VLAN (IEEE 802.1Q) settings on a
port. See
Section 7.1 on page 57 for more information on static VLAN. Click the VLAN Port
Setting link in the VLAN Status screen.
Figure 25 Advanced Application > VLAN > VLAN Port Setting
The following table describes the labels in this screen.
VID This field displays the ID number of the VLAN group. Click the number to edit the
VLAN settings.
Active This field indicates whether the VLAN settings are enabled (Yes) or disabled (No).
Name This field displays the descriptive name for this VLAN group.
Delete Click Delete to remove the selected entry from the summary table.
Cancel Click Cancel to clear the Delete check boxes.
Table 14 Advanced Application > VLAN > Static VLAN (continued)
LABEL DESCRIPTION
Table 15 Advanced Application > VLAN > VLAN Port Setting
LABEL DESCRIPTION
Port This field displays the port number.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this
row first to set the common settings and then make adjustments on a port-by-port
basis.
Note: Changes in this row are copied to all the ports as soon as you
make them.
Ingress Check If this check box is selected for a port, the Switch discards incoming frames for
VLANs that do not include this port in its member set.
Clear this check box to disable ingress filtering.
PVID Enter a number between 1and 4094 as the port VLAN ID.