2 entering the password, 3 navigating the smt interface, Table 181 main menu commands – ZyXEL Communications Internet Security Appliance ZyWALL5UTM 4.0 User Manual

Page 497

ZyWALL 5/35/70 Series User’s Guide

497

Chapter 32 Introducing the SMT

Figure 263 Initial Screen

initialize ch =0, ethernet address: 00:A0:C5:01:23:45
initialize ch =1, ethernet address: 00:A0:C5:01:23:46
initialize ch =2, ethernet address: 00:A0:C5:01:23:47
initialize ch =3, ethernet address: 00:A0:C5:01:23:48
initialize ch =4, ethernet address: 00:00:00:00:00:00
AUX port init . done
Modem init . inactive

Press ENTER to continue...

32.2.2 Entering the Password

The login screen appears after you press [ENTER], prompting you to enter the password, as
shown below.

For your first login, enter the default password “1234”. As you type the password, the screen
displays an “X” for each character you type.

Please note that if there is no activity for longer than five minutes after you log in, your
ZyWALL will automatically log you out and display a blank screen. If you see a blank screen,
press [ENTER] to bring up the login screen again.

Figure 264 Password Screen

Enter Password : XXXX

32.3 Navigating the SMT Interface

The SMT is an interface that you use to configure your ZyWALL.

Several operations that you should be familiar with before you attempt to modify the
configuration are listed in the table below.

Table 181 Main Menu Commands

OPERATION KEYSTROKES

DESCRIPTION

Move down to

another menu

[ENTER]

To move forward to a submenu, type in the number of the desired

submenu and press [ENTER].

Move up to a

[ESC]

Press the [ESC] key to move back to the previous menu.