ZyXEL Communications Internet Security Appliance ZyWALL5UTM 4.0 - Manual (Page 419)

ZyWALL 5/35/70 Series User’s Guide
419 Chapter 26 DNS
The following table describes the labels in this screen.
Table 148 System DNS: Add Address Record
LABEL DESCRIPTION
FQDN Type a fully qualified domain name (FQDN) of a server. An FQDN starts with a
host name and continues all the way up to the top-level domain name. For
example, www.zyxel.com.tw is a fully qualified domain name, where “www” is the
host, “zyxel” is the second-level domain, and “com.tw” is the top level domain.
IP Address If this entry is for one of the WAN ports on a ZyWALL with multiple WAN ports,
select WAN Interface and select WAN 1 or WAN 2 from the drop-down list box.
If this entry is for the WAN port on a ZyWALL with a single WAN port, select WAN
Interface.
For entries that are not for the WAN port(s), select Custom and enter the IP
address of the host in dotted decimal notation.
Enable Wildcard Select the check box to enable DNS wildcard.
Apply Click Apply to save your changes back to the ZyWALL.
Cancel Click Cancel to exit this screen without saving.
26.6.2 Inserting a Name Server record
Click Insert in the System screen to insert a name server record.
Figure 202 System DNS: Insert Name Server Record