ZyXEL Communications Internet Security Appliance ZyWALL5UTM 4.0 - Manual (Page 457)

ZyWALL 5/35/70 Series User’s Guide
457 Chapter 28 UPnP
28.4.2 Installing UPnP in Windows XP
Follow the steps below to install UPnP in Windows XP.
1 Click Start, Settings and Control
Panel.
2 Double-click Network Connections.
3 In the Network Connections window,
click Advanced in the main menu and
select Optional Networking
Components ….
The Windows Optional Networking
Components Wizard window displays.
4 Select Networking Service in the
Components selection box and click
Details.
5 In the Networking Services window,
select the Universal Plug and Play
check box.
6 Click OK to go back to the Windows
Optional Networking Component
Wizard window and click Next.
28.5 Using UPnP in Windows XP Example
This section shows you how to use the UPnP feature in Windows XP. You must already have
UPnP installed in Windows XP and UPnP activated on the ZyXEL device.
Make sure the computer is connected to a LAN port of the ZyXEL device. Turn on your
computer and the ZyXEL device.