2 wep encryption, Figure 28 wireless: no security, Table 21 wireless no security – ZyXEL Communications 802.11g Wireless Firewall Router P-320W User Manual
Page 65

P-320W User’s Guide
Chapter 4 Wireless LAN
65
Figure 28 Wireless: No Security
The following table describes the labels in this screen.
Table 21 Wireless No Security
LABEL
DESCRIPTION
Security Mode
Choose No Security from the drop-down list box.
Apply
Click Apply to save your changes back to the Prestige.
Reset
Click Reset to reload the previous configuration for this screen.
4.4.2 WEP Encryption
WEP encryption scrambles the data transmitted between the wireless stations and the access
points to keep network communications private. It encrypts unicast and multicast
communications in a network. Both the wireless stations and the access points must use the
same WEP key.
Your Prestige allows you to configure up to four 64-bit or 128-bit WEP keys but only one key
can be enabled at any one time.
In order to configure and enable WEP encryption; click Wireless LAN and Wireless to
display the General screen.
Select Static WEP from the Security Mode list.