ZyXEL Communications 802.11g Wireless Firewall Router P-320W - Manual (Page 119)

P-320W User’s Guide
Chapter 11 Remote Management Screens 119
C
H A P T E R
11
Remote Management Screens
This chapter provides information on the Remote Management screens.
11.1 Remote Management Overview
Remote management allows you to determine which services/protocols can access which
Prestige interface (if any) from which computers.
Note: When you configure remote management to allow management from the WAN,
you still need to configure a firewall rule to allow access. See the firewall
chapters for details on configuring firewall rules.
You may manage your Prestige from a remote location via:
• LAN only • ALL (LAN and WAN)
To disable remote management of a service, select LAN in the corresponding Server Access
field.
11.1.1 Remote Management Limitations
Remote management over LAN or WAN will not work when:
1 You have disabled that service in one of the remote management screens.
2 The IP address in the Secured Client IP field does not match the client IP address. If it
does not match, the Prestige will disconnect the session immediately.
3 There is a firewall rule that blocks it.
11.1.2 Remote Management and NAT
When NAT is enabled:
• Use the Prestige’s WAN IP address when configuring from the WAN.
• Use the Prestige’s LAN IP address when configuring from the LAN.