beautypg.com

Zoom Gateway/Router Zoom V3 User Manual

Page 70

background image

70

Zoom V3 User’s Guide

For RedHat

Edit or create /etc/sysconfig/network-scripts/ifcfg-eth0 so

that it contains the following three lines:

DEVICE=eth0

ONBOOT=yes
BOOTPROTO=dhcp

For SuSE

Edit the file /etc/rc.config; search for the variables
NETCONFIG, NETDEV_0, and IFCONFIG_0.
Set them as follows (see the instructions in rc.config):

NETCONFIG="_0"

NETDEV_0="eth0"
IFCONFIG_0="dhcpclient"

Reboot with this command: /sbin/shutdown -r now.

For Debian

Add this line to the file /etc/network/interfaces: iface eth0 inet
dhcp. Reboot with this command: /sbin/shutdown -r now.
Now return to Configuring Your V3 on page 14.

See also other documents in the category Zoom Hardware: