Zoom Gateway/Router Zoom V3 - Manual (Page 27)

Chapter 2: Voice Over IP Settings 27
2222
Under Service Configuration, click the Auto Account
Configure box to remove the checkmark.
3333
Enter the User ID, Authorization ID, Password,
Domain/Realm, and SIP Proxy Address in the
appropriate boxes. These five boxes must be filled in
correctly. Enter them carefully and check to make sure
they match the information given to you.
4444
If you installed the V3 behind a router or your service
provider told you to enable STUN, click Yes to enable
STUN. Then, enter the STUN server name and port
number. These should have been given to you by your
service provider.
5555
Enter any additional information required by your
service provider. If your provider gave you any other
information, enter it in the appropriate boxes.
6666
You can now use Select Ring &Tone by Country/Region
to decide what kind of ring and ring tone you would like for
your incoming VoIP calls. You can either choose to have your
ring and ring tone be the same as your normal phone ring,
slightly different, or completely different. We recommend that
you make the ring different from your normal ring so that you
can tell the difference between an incoming VoIP call and a
regular call.
To make your incoming ring the same as your normal
ring, choose your country from the pulldown menu.
To make your incoming ring slightly different from your
normal ring, choose your country from the pulldown menu
and pick the “VoIP” option. This will give you the same tone
as your normal ring with a different ring pattern.
For a completely different ring tone for your VoIP calls you
can choose any ring listed for any country.