Zoom Gateway/Router Zoom V3 - Manual (Page 48)

48 Zoom V3 User’s Guide
From the Apple menu, choose Control Panels and then TCP/IP
to display the TCP/IP Window. Under the TCP/IP tab, highlight
Manually in the Configure: list box and enter the settings for IP
Address, Subnet mask, Router address, and Name server
addr. shown below, unless you chose an IP address in Step 1
other than 10.2.2.16, in which case you should enter the number
that you chose instead of 10.2.2.16. When done, close the Window
and you will be prompted to click Save. Then
continue with
Step 6.
IP address 10.2.2.16
Subnet mask 255.255.255.0
Router address
(V3’s LAN IP address)
10.2.2.2
Name server addr. 10.2.2.2
5555
Red Hat Linux Users Only:
a
a a a Edit /etc/sysconfig/network-scripts/ifcfg-eth0 so
that it contains the following lines:
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
BROADCAST=10.2.2.255
NETMASK=255.255.255.0
IPADDR=10.2.2.16
GATEWAY=10.2.2.2
NETWORK=10.2.2.0
b b b b Then edit or create /etc/resolv.conf so that it
contains the following line:
NAMESERVER=10.2.2.2
Note:
If you are using another version of Linux and you are unsure
how to enter this information, consult the help file or
documentation that came with your operating system.