Xerox Phaser 6110MFP - Manual (Page 9)

iv
Professional/Business Environment
Application of this symbol on your equipment is confirmation that
you must
dispose of this equipment in compliance with agreed national
procedures. In accordance with European legislation, end of life
electrical and electronic equipment subject to disposal must be
managed within agreed procedures.
Domestic/Household Environment
Application of this symbol on your equipment is confirmation that
you should
not dispose of the equipment in the normal household waste
stream. In accordance with European legislation, end of life
electrical and electronic equipment subject to disposal must be
segregated from household waste.
Private households within EU member states may return used
electrical and electronic equipment to designated collection
facilities free of charge. Please In some member states, when you
purchase new equipment, your local retailer may be required to
take back your old equipment free of charge. Please ask
yourretailer for information.
Prior to disposal, please contact your local dealer or Xerox
representative for end of life takeback information.
(USA, Canada)
If you are managing the disposal of your Xerox product, please note that the
product contains, Lead*, lamp(s) with mercury*, Perchlorate* and other
materials whose disposal may be regulated due to environmental
considerations. The presence of these materials is fully consistent with global
regulations applicable at the time that the product was placed on the market.
For recycling and disposal information, contact your local authorities. In the
United States, you may also refer to the Electronic Industries Alliance web site:
Perchlorate Material - This product may contain one or more
Perchlorate-containing devices, such as batteries. Special handling
may apply, please see www.dtsc.ca.gov/ hazardouswaste/perchlorate*.
Vermont Mercury
In 2005, Vermont passed new legislation that posed labeling requirements to
include nearly all mercury-added products sold into the state. The overall
impact of this bill requires Xerox to label its owner's manual AND product as
a means to inform the end user the presence of mercury. All mercury-added
products sold after July 1, 2007 must be labeled under the provisions of the
new law and in accordance with a labeling plan approved by the State of
Vermont.
The scope of this legislation impacts all products containing mercury
lamps* (removable / non-removable); such as scanner lamps used for both
backlighting and non-backlighting purposes. Based upon Xerox approved
Certified Labeling Plan, the following language must be included in the
owner's manual or addendum to the owner's manual:
"Xerox operates a worldwide equipment takeback and reuse/recycle
program. Contact your Xerox sales representative (1-800-ASK-XEROX) to
determine whether this Xerox product is part of the program. For more
information about Xerox environmental programs, visit www.xerox.com/
environment.
If you are managing the disposal of your Xerox product, please note that the
product contains lamp(s) with mercury, and may contain lead, Perchlorate
and other materials whose disposal may be regulated due to environmental
considerations. The presence of these materials is fully consistent with global
regulations applicable at the time that the product was placed on the market.
For recycling and disposal information, contact your local authorities. In the
United States, you may also refer to the Electronic Industries Alliance web
site: www.eiae.org."
Energy program compliance
USA
ENERGY STAR
As an ENERGY STAR® partner, Xerox Corporation has determined that this
product meets the ENERGY STAR guidelines for energy efficiency.
The ENERGY STAR and ENERGY STAR MARK are
registered United States
trademarks. The ENERGY STAR Imaging Equipment
Program is a team effort between U.S., European
Union and Japanese governments and the office
equipment industry to promote energy-efficient copiers,
printers, fax, multifunction machine, personal
computers, and monitors. Reducing product energy
consumption helps combat smog, acid rain and long-
term changes to the climate by decreasing the
emissions that result from generating electricity.
Xerox ENERGY STAR equipment is preset at the
factory. Your machine will be delivered with the timer for
switching to Power Save Mode from the last copy/print
out, set at 15 minutes. A more detailed description of
this feature can be found in the Machine Setup Section
of this guide.
Canada
Environmental Choice
Terra Choice Environmental Serviced, Inc. of Canada has verified that this
product conforms to all applicable Environmental Choice EcoLogo
requirements for minimized impact to the environment.
As a participant in the Environmental Choice program, Xerox Corporation has
determined that this product meets the Environmental Choice guidelines for
energy efficiency.
Environment Canada established the Environmental
Choice program in 1988 to help consumers identify
environmentally responsible products and services. Copier,
printer, digital press and fax products must meet energy
efficiency and emissions criteria, and exhibit compatibility
with recycled supplies. Currently, Environmental Choice has